GRANDRIB 3® PLUS ENDURACOTE
Grandrib 3® PLUS is “THE ORIGINAL” – Fabral designed the original 9” on center ribbed panel.
Most others have copied but no one has matched its strength, durability or attractive design.
CLEARY COLOR CHART
Bare Steel: Fabral uses only 29 gauge,100,000 PSI nominal tensile
strength bare structural steel with a minimum .015 thickness before
paint to assure you of the thickest, strongest panel in the industry.
UP TO 60% STRONGER THAN SOME COMPETITORS’ 26 GAUGE,
commercial steel at 40,000 PSI.
Galvanization (2 layers): Grandrib 3® Plus has up to 1.O oz
of zinc protection as compared to competitors’ G60 or G90 products,
resulting in up to 67% more corrosion protection.
Zinc Pre-Treatment (2 layers): Prepares the surface for paint while adding additional corrosion
resistance. Many other panels skip this step.
Sealer Coat (2 layers): Seals the Zinc Pre-treatment and smooths the surface to receive the paint.
Thick Primer Coat (2 layers): Prepares the surface for consistent color application while adding
even more corrosion protection.
Backer Coat: Full coat backer in off-white for consistency inside the building.
Top Coat: Enduracote®, the industry leading exterior paint for color retention and durability.
GRANDRIB 3® PLUS WARRANTY
- Lifetime film integrity warranty for walls and roofs
- 35 year warranty against fade and chalk for walls and roofs
- 15 year edge rust warranty against acid rain
- 30 year non-perforation warranty against acid rain for walls;
25 year warranty for roofs
EXCEPTIONAL UNIFORM LOAD
More bends = greater strength
Trapezoidal Rib Configuration Major Ribs 9” o/c
Compare the load of
236 lbs per square
(236 PSF) on 24”
any steel panel in the